MDT Rails & Hoods

Please remember to check availability - there is no lie stock control on this web site

MDT M-LOK Barricade stops

MDT
Add to cart
  • Description
Mil-spec Type III hard-black anodized aluminum barricade stops that attach to M-LOK compatible hand guards and forends. Available in flat-face or rounded face to suit a variety of applications.

SPECIFICATIONS

  • Compatible with M-Lok mounting systems commonly found on rifle chassis and handguards, including the MDT ESS and LSS-XL Gen2
  • Large 1” x 1” gripping face that provides substantial contact area for a stable interface to barricades and other shooting platforms
  • Large, aggressive points grab onto the barricade and ensure the rifle remains stable during firing
  • 7075-T6 aluminum construction
  • Mil-spec Type III hard anodized finish to stand up to repeated usage
  • Available with a flat gripping face for shooting off of straight barricades
  • Available with a rounded gripping face to provide smoother side-to-side panning

MDT M-LOK Hand stop

MDT
MDT103216-BLK
Add to cart
  • Description

Increase your grip and create an index point for your hand.

The MDT M-LOK Hand Stop is perfect for all rifles! Increase your grip, create a mechanical index point and use as a small bumper when loading into barriers. Ideal for compact modern sporting rifles when there is a risk of getting your hand to close to the muzzle. Attaches to all rifles that have an M-LOK interface.



MDT M-LOK Swivel stud

MDT
MDT103212-BLK
Add to cart
  • Description

Perfect for attaching a sling or a Harris style bipod.

Take full advantage of the modularity of your chassis. Use the MDT M-LOK Sling Swivel Stud to get the perfect sling or bipod placement. Attaches in seconds.



MDT M-LOK QD Sling attachment

MDT
Add to cart
  • Description
Anodized aluminum QD adaptor for attaching accessories to M-LOK compatible hand guards and forends.

DETAILS

Designed to allow the shooter the ability to add an additional QD mount to their forends on AR platforms and bolt action chassis sytems such as our ESS Chassis. This is done by attaching the M-LOK QD mount through any of the M-LOK slots present on the forend.

The MDT M-LOK QD mounts come in two varieties, one with full 360 degree rotation and one with anti-rotation built in. The anti-rotation allows the QD sling to be attached either vertically or horizontally.

SPECIFICATIONS

  • Mounts are made from aircraft grade 6061-T6 aluminum and hard anodized to provide superior durability and toughness
  • Anodized aluminum QD adapter for attaching accessories to M-LOK compatible hand guards
  • Machined aluminum with hard anodized finish

HARDWARE INCLUDED

All installation hardware is included.

MDT .20 MOA Picatinny rails

MDT
Add to cart
  • Description
  • More Details

MDT’s Scope Base Picatinny Rails are designed to make the mounting of your optics easier. They are machined from 6061-T6 aluminum, then hard-anodized black for a durable finish. The underside of the rails are profiled to allow the rail to be mounted flush on the receiver and to match the geometry of the ejection port. These rails are designed with a 20 MOA incline providing additional elevation adjustment from your scope*. A recoil lug has been integrated in the underside rail profile on models where the action’s design allows for this feature.

*Additional elevation adjustment will vary based on your scope specifications.

SPECIFICATIONS

  • MIL-STD-1913 & STANAG 4694 spec rails
  • CNC machined from 6061-T6 aircraft grade aluminum
  • Mil-Spec Type III hard anodized
  • 20 MOA rail
  • Integrated recoil lug**
  • SA & LA options
  • Contoured for snag-free operation
  • **depending on model

HARDWARE INCLUDED

  • #6-48 TORX screws (rail base drilled to accommodate #8-40 screws also)

MDT Long rail Remington 700 - picatinny

MDT
Add to cart
  • Description
  • More Details
MDT Picatinny Scope Base with Night Vision Mount is specifically designed to make the mounting of your optics and night vision (NV), lighting or infrared (IR) accessories easier. They are machined from 6061-T6 aluminum, then hard-anodized black for a durable finish. The rails are profiled to allow the back section of the rail to be mounted flush on the receiver while the front section of the rail is free-floating over the barrel. Both rear and front top rail sections are machined in parallel planes and the front section of the rail sits lower to accommodate installation of optics with larger objectives. These rails are designed with a 20 MOA incline providing additional elevation adjustment from your scope*. A recoil lug has been integrated in the underside rail profile on models where the action’s design allows for this feature.

SPECIFICATIONS

  • CNC machined from 6061-T6 aircraft grade aluminum
  • Mil-Spec Type III hard anodized
  • 20 MOA rail
  • Integrated recoil lug
  • Compatible with larger objective optics
  • Free-Floating profile over barrel
  • SA & LA options

HARDWARE INCLUDED

  • #6/48 TORX screws in ⅜” length
  • #8/40 TORX screws in ⅜’ length (on Savage models only)

COMPATIBILITY

MDT’s Picatinny Long Top Rail systems are currently available for Remington 700

MDT M-LOK Picatiny rails

MDT
From
Add to cart
  • Description
Anodized aluminum Picatinny rails for attaching accessories to M-LOK compatible hand guards and forends.

INDIVIDUAL SPEC

  • 1.5" RAIL = 3 SLOTS

  • 2.5" RAIL = 5 SLOTS

  • 3.15" RAIL = 7 SLOTS

  • 4" RAIL = 8 SLOTS + 1 FLUSH CUP SLING MOUNT

  • 5" RAIL = 10 SLOTS + 1 FLUSH CUP SLING MOUNT

  • 5.5" RAIL = 12 SLOTS + 1 FLUSH CUP SLING MOUNT

  • 6.5" RAIL = 14 SLOTS + 1 FLUSH CUP SLING MOUNT

  • 7" RAIL = 15 SLOTS + 2 FLUSH CUP SLING MOUNTS

  • 7.9" RAIL = 17 SLOTS + 2 FLUSH CUP SLING MOUNTS

  • 8.6" RAIL = 19 SLOTS + 2 FLUSH CUP SLING MOUNTS

  • 9.4" RAIL = 21 SLOTS + 2 FLUSH CUP SLING MOUNTS

DETAILS

MDT’s M-LOK Picatinny Rails are designed to be a reliable addition to our chassis systems when installing various accessories on your bolt action rifle. They are machined from 6061-T6 aluminum, then hard-anodized black for a durable finish. The rails also feature laser etched positioning markers making repeatable set ups easier. They come in a variety of lengths, feature an integral QD flush cup sling mount on select sizes and include the necessary hardware for mounting to M-LOK compatible attachment systems, which are currently integrated in many of our chassis system and forend designs.

SPECIFICATIONS

  • Compatible with M-Lok attachment systems only
  • MIL-STD-1913 & STANAG 4694 spec rails
  • CNC machined from 6061-T6 aircraft grade aluminum
  • Mil-Spec Type III hard anodized
  • Laser etched position markers for quick reference
  • Contoured for snag-free operation
  • 11 length options
  • QD flush cup sling mount on select sizes
  • Height 9.4mm (0.370”)

HARDWARE INCLUDED

  • 10/24 flat head screws in ½” length
  • M-Lok nuts

COMPATIBILITY

MDT’s M-Lok Picatinny Rails are compatible with M-Lok attachment systems, such as all MDT Chassis Systems, our SRS and SCS buttstocks.

MDT Picatinny rails

MDT
From
Add to cart
  • Description

DETAILS

MDT’s Picatinny rails are designed to be a reliable addition to our chassis systems when installing various accessories on your bolt action rifle. They are machined from 6061-T6 aluminum, then hard-anodized black for a durable finish. These rails come in 3 different lengths and feature an integral QD flush cup sling mount on the 2 longer sizes - 2.5" rail features no flush cup mount

SPECIFICATIONS

  • MIL-STD-1913 & STANAG 4694 spec rails
  • CNC machined from 6061-T6 aircraft grade aluminum
  • Mil-Spec Type III hard anodized
  • Contoured for snag-free operation
  • 2.5”, 5.0” and 6.5” length options
  • QD flush cup sling mount on the 5.0” and 6.5” rails only
  • Screw spacing is 1.6” center to center (common with other reputable rail brands)
  • Height 9.4mm (0.370”)

HARDWARE INCLUDED

  • 10/24 flat head screws in ⅜” and ⅝” length
  • 10/24 weld nuts for installation on AR15 style handguards

COMPATIBILITY

MDT’s Picatinny rails are compatible with the majority of our chassis systems. They are designed to be installed on the underside of the chassis system forend. MDT’s 2.5” rail is also well suited to be used as a monopod rail on our SRS V4 buttstock. Our rails can also be installed on various AR15 style handguards with the use of the weld nuts provided with the hardware.

MDT Picatinny rail for HS3 Chassis - 2 PACK

MDT
MDT102279-BLK
Add to cart
  • Description

DETAILS

MDT’s Picatinny side rails for HS3 have been specifically designed for our Hunter/Sniper chassis series. They come in a pair of 6.5” rails which also feature an integral QD flush cup sling mount. They are machined from 6061-T6 aluminum, then hard-anodized black for a durable finish. These rails are designed to be installed overtop of the HS3 polymer side panels and are a reliable addition to the MDT HS3 chassis system when it comes to customizing your rifle with various accessories.

SPECIFICATIONS

  • MIL-STD-1913 & STANAG 4694 spec rails
  • CNC machined from 6061-T6 aircraft grade aluminum
  • Mil-Spec Type III hard anodized
  • Contoured for snag-free operation
  • QD flush cup sling mount
  • Screw spacing is 1.6” center to center
  • 6.5" length
  • Height 9.4mm (0.370”) once installed

HARDWARE INCLUDED

  • 10/24 flat head screws in ⅝” length

COMPATIBILITY

MDT’s Picatinny side rails for HS3 are strictly meant to be used with our Hunter/Sniper chassis system.

MDT M-LOK ARCA Swiss rails

MDT
From
Add to cart
  • Description

Securely attach your rifle to an ARCA mount with the MDT M-LOK ARCA Rail.

Arca Swiss adapters have become the standard for attaching rifles to tripods, bipods and support gear. Need to attach your MDT Chassis rifle to an ARCA interface? Use our M-LOK ARCA Rail.

The MDT M-LOK ARCA Rail is Mil-spec Type III hard-black anodized. Available as a standard, flat profile that can adapt to most M-LOK compatible surfaces or as an angled profile that is designed to match the underside profile of the MDT LSS-XL Gen2. Available in multiple lengths.

SPECIFICATIONS

  • Compatible with M-Lok mounting systems commonly found on rifle chassis, stocks and handguards, including the MDT ESS and LSS-XL Gen2
  • Mounting surface to fit a wide array of tripod adapters and accessories
  • 14 drilled and tapped holes to allow proper indexing of accessories for increased consistency
  • Rearward overhang to allow mounting on a tripod closer to the rifles center of gravity
  • Solid M-Lok boss to withstand repeated recoil
  • Angled front surface to ease tripod engagement and reduce snagging
  • Rounded edges to decrease shooter discomfort when shooting standing or unsupported
  • 6061-T6 aluminum construction
  • Mil-spec Type III hard anodized finish to stand up to repeated usage
  • All of MDT's RRS/Arca dovetails are machined and checked to the Really Right Stuff (RRS) standard.

MDT ARCA rail for ESS foregrip

MDT
MDT103486-BLK
Add to cart
  • Description

Use your ESS Foregrip to attach to an ARCA adapter.

Mil-spec Type III hard-black anodized aluminum ARCA adapters that attach over-top-of MDT ESS foregrips. Features an angled profile, that fits inside of the existing foregrip to allow infinite adjustment of Arca accessories along the 5” section. Up your ESS’ performance by quickly being able to shift bipods rearwards for awkward shots, or adapting to a tripod with ease and speed.

DETAILS

Mil-spec Type III hard-black anodized aluminum Arca adapters that attach over-top-of MDT ESS foregrips. Features an angled profile, that fits inside of the existing foregrip to allow infinite adjustment of Arca accessories along the 5” section. Up your ESS’ performance by quickly being able to shift bipods rearwards for awkward shots, or adapting to a tripod with ease and speed.

SPECIFICATIONS

  • Compatible with MDT ESS chassis systems ONLY. Will not fit other chassis
  • 5” of available mounting surface to fit a wide array of tripod adapters and accessories
  • 24 drilled and tapped holes to allow proper indexing of accessories for increased consistency
  • Fits on top of ESS foregrip without having to remove anything but the existing screws
  • Angled design to provide flat, parallel surface for accessory mounting
  • Rearward overhang to allow mounting on a tripod closer to the rifles center of gravity
  • Cutout to allow all front action screws clearance
  • Angled front surface to ease tripod engagement and reduce snagging
  • Rounded edges to decrease shooter discomfort when shooting standing or unsupported
  • 6061-T6 aluminum construction
  • Mil-spec Type III hard anodized finish to stand up to repeated usage
  • Includes new hardware to be correctly mounted

MDT Bolt on ARCA rail

MDT
MDT103825-BLK
Add to cart
  • Description

Attach an ARCA Adaptor to a Magpul MOE interface.

Mil-spec Type III hard-black anodized aluminum ARCA adapters that attach to hand guards and forends with Magpul MOE spaced tapped holes. Features a flat profile, to allow infinite adjustment of ARCA accessories along the 6” section.

DETAILS

Mil-spec Type III hard-black anodized aluminum Arca adapters that attach to hand guards and forends with Magpul MOE spaced tapped holes. Features a flat profile, to allow infinite adjustment of Arca accessories along the 6” section.

SPECIFICATIONS

  • Compatible with Magpul MOE hole spacing mounting systems commonly found on rifle chassis, stocks and handguards, including the MDT LSS, HS3, TAC21 (non M-Lok), LSS-22 and  LSS-XL Gen 1
  • 6” of available mounting surface to fit a wide array of tripod adapters and accessories
  • 26 drilled and tapped holes to allow proper indexing of accessories for increased consistency
  • Rearward overhang to allow mounting on a tripod closer to the rifles center of gravity
  • Angled front surface to ease tripod engagement and reduce snagging
  • Rounded edges to decrease shooter discomfort when shooting standing or unsupported
  • 6061-T6 aluminum construction
  • Mil-spec Type III hard anodized finish to stand up to repeated usage
  • All of MDT's RRS/Arca dovetails are machined and checked to the Really Right Stuff (RRS) standard.

MDT NV Hood - HS3

MDT
MDT102264-BLK
Add to cart
  • Description
To fit MDT HS3 Chassis

MDT NV Hood for LSS Chassis

MDT
MDT102223-BLK
Add to cart
  • Description

Increase the capabilities of your MDT LSS chassis.

Night vision is an amazing tool for soldiers, law enforcement and hunters.

Take the modularity of your MDT LSS chassis to the next level with our Night Vision Hood. Perfect for clipping on a night vision device in from of your scope. For extreme long range shooting, our hoods can accommodate a prism, like the CHARLIE TARAC from TACOMHQ.

For standard profile barrels

MDT NV Hood for LSS-XL Gen 2

MDT
MDT103185
Add to cart
  • Description

Take the modularity of your MDT LSS-XL Gen 2 chassis to the next level with our Night Vision Hood. Perfect for clipping on a night vision device in from of your scope.



MDT NV Hood Oversize - LSS

MDT
MDT102239-BLK
Add to cart
  • Description
Note; Drilling and tapping is required in order to fit this product