rcbslogo

RCBS Reloading progressive presses

RCBS progressive presses provide superb functionality with outstanding build quality.
Listed below are our RCBS progressive presses & kits, plus a number of optional accessories to provide you with all the RCBS reloading progressive press products that you could require.

RCBS Pro Chucker 7 progressive press

RCBS
RCB-88911
Add to cart
  • Description
  • More Details
  • Related Products
RCBS Pro Chucker 7 progressive press for sale at McAvoy Guns

The ultimate progressive press!

  • Seven-station auto indexing
  • Quick-change die plate
  • Quick Change powder measure metering components
  • Zerk fitting for lubrication
  • Loaded cartridge bin
  • Load rate up to 600 rounds per hour (pistol)
  • Made in U.S.A.

    The seven stations allow products such as the powder checker die & lock-out die to be fitted in turn allowing for extra safety when reloading high numbers of rounds.

  • Take reloading to the elite level with new RCBS Pro Chucker 7 Auto Index Progressive Press. The first seven-station auto-indexing press on the market, The Pro Chucker 7 features automatic indexing for maximum production, with a load rate of approximately 600 rounds per hour. The quick-change die plate allows fast caliber change over for even greater efficiency. Standard primer pick up tubes are used with the safety-shielded priming system. Spent primers are efficiently dropped from the bottom of the press to be captured in a trash receptacle. The large powder capacity Quick Change powder measure reduces the number of times you have to fill the powder hopper. Plus, the Quick Change drain tube allows you to drain the powder measure without removing it from the press. QC metering assemblies allow shortened set up times when switching powders. Seven stations allows you to progressive load any way you want: Seat bullets and crimp separately. Use a bullet feeder but also use a Lock-Out or Powder Checker die. With seven stations, you can do it all.  

    Technical Information

    • Press Type: Progressive
    • Frame Material: Die Cast Aluminum
    • Frame Design: O-Frame
    • Frame Offset: Not provided by manufacturer
    • Frame Opening Size: 4.625"
    • Handle Location: Bottom Right
    • Die Size Accepted: 7/8"-14 Threaded Die
    • Die Bushing Accepted: No, uses quick change die plate
    • Die Bushing Brand Used: RCBS Die Plate
    • Spent Primer Collection System: No
    • Ram Stroke: Not provided by manufacturer
    • Ram Diameter: Not provided by manufacturer
    • Priming Feature: Standard primer tubes
    • Number of Mounting Holes: 3
    • Mounting Hardware Included: No
    • Warranty: Limited Lifetime

    RCBS Pro Chucker 7 die plate - inc. powder measure

    RCBS
    RCB-88913
    Add to cart
    • Description
    • More Details
    RCBS Pro Chucker 7 die plate including powder measure for sale at McAvoy Guns
    Extra die plates for the RCBS Pro Chucker 7 progressive reloading system are designed to eliminate the need to re-install and adjust dies for each reloading session saving the reloader valuable time. Simply have a die plate setup for each caliber that is being reloaded. The quick-change die plate allows fast caliber change over for even greater efficiency. The large powder capacity Quick Change powder measure reduces the number of times you have to fill the powder hopper. Plus, the Quick Change drain tube allows you to drain the powder measure without removing it from the press. QC metering assemblies allow shortened set up times when switching powders.
    The RCBS Quick Change Powder Measure offers reloaders the ability to quickly go from light handgun to magnum rifle charges. The metering assemblies are easily changed with the pull of a pin and additional metering assemblies can be purchased and set to favorite powder charges for quick changes without resetting. The large powder hopper holds up to a pound of smokeless powder.

    RCBS Pro Chucker 5 progressive press

    RCBS
    RCB-88910
    Add to cart
    • Description
    • More Details
    • Related Products
    RCBS Pro Chucker 5 progressive press for sale at McAvoy Guns
  • Five-station auto indexing
  • Quick-change die plate
  • Quick Change powder measure metering components
  • Zerk fitting for lubrication
  • Loaded cartridge bin
  • Load rate up to 600 rounds per hour (pistol)
  • Made in U.S.A.
  • The RCBS Pro Chucker 5 Auto Index Progressive Press is the next level in reloading efficiency and customization. It features five-station automatic indexing for maximum production, with a load rate of approximately 600 rounds per hour. The quick-change die plate allows fast caliber change over for even greater efficiency. Standard primer pick up tubes are used with the safety-shielded priming system. Spent primers are efficiently dropped from the bottom of the press to be captured in a trash receptacle. The powder measure is fitted with Quick Change metering components that allow you to drain powder without removing the measure from the press. You can also quickly swap out preset metering screws for dispensing the new powder. Plus, the new Pro Chucker 5 is the first progressive press that can be converted from five- to seven-station operation with the Pro Chucker conversion kit (sold separately).

    Technical Information

    • Press Type: Progressive
    • Frame Material: Die Cast Aluminum
    • Frame Design: O-Frame
    • Frame Offset: Not provided by manufacturer
    • Frame Opening Size: 4.625"
    • Handle Location: Bottom Right
    • Die Size Accepted: 7/8"-14 Threaded Die
    • Die Bushing Accepted: No, uses quick change die plate
    • Die Bushing Brand Used: RCBS Die Plate
    • Spent Primer Collection System: No
    • Ram Stroke: Not provided by manufacturer
    • Ram Diameter: Not provided by manufacturer
    • Priming Feature: Standard primer tubes
    • Number of Mounting Holes: 3
    • Mounting Hardware Included: No
    • Warranty: Limited Lifetime

    RCBS Pro Chucker 5 die plate

    RCBS
    RCB-88912
    Add to cart
    • Description
    RCBS Pro Chucker 5 die plate for sale at McAvoy Guns

    Additional die plate for the RCBS Pro Chucker - 5 reloading press.

    Enables fast change over of caliber, without loosing how each die has been set up.

    A must if you reload more then one caliber

    RCBS Pro Chucker 5 to 7 conversion

    RCBS
    RCB-88914
    Add to cart
    • Description
    • More Details
    RCBS Pro Chucker 5 to 7 conversion for sale at McAvoy Guns
    If you purchase a RCBS Pro Chucker 5 & need to upgrade to the Pro Chucker 7, then this is the kit for you.
  • Pro Chucker 7 - 7 station die plate
  • Shell plate holder assembly
  • Large and small priming system
  • Shell Plate Indexing system
  • Quick Change powder measure
  • RCBS Pro 2000 star wheel

    RCBS
    RCB-88878
    Add to cart
    star-wheel
    • Description
    Use it attatched to the shell plate for quicker caliber change over.

    RCBS Pro 2000 die plate

    RCBS
    RCB-88877
    Add to cart

    RCBS Pro 2000 Low primer detector kit

    RCBS
    RCB-88879
    Add to cart
    • Description
    For extra reassurance of safety when using a progressive press, Automatically detects low primer

    RCBS Tube Priming Conversion Kit

    RCBS
    RCB-88876
    Add to cart
    • Description
    Convert your RCBS Pro 2000 press for tube priming

    RCBS Reloading Turret press

    RCBS
    RCB-88901
    Add to cart
    • Description

    Simple Operation with complete control over every reloading step. Can be operated in single stage or pro-
    gressive mode.

    recommend uniflow with case activated linkage kit

    RCBS Reloading Turret press deluxe kit

    RCBS
    RCB-88906
    Add to cart
    • Description
    • More Details
    With this kit you'll only require your dies & shell holder to start!!!

    A fantastic kit for a fantastic price!!!

    In Progressive mode, output can be increased from 50 to 200 rounds per hour! Or you can use the single stage mode to load cases in the batch mode.
    Click on the image to view pictures of each of the included items

    This press is also great if you are begginner, start off in single mode & then as you gain confidence change to progressive mode. No complex or automated processes.

    Features;
    • Rugged Cast Iron Frame, toggle block & turret head
    • Heavy duty construction to minimize springing
    • Indent on turret head for positive alaignment
    • Standard 7/8" -14 thread for the most popular dies & accessories
    • Six station turret head allows many combinationsin the mounting sequence of dies & powder measures which allows you to load more than one caliber at once!
    • Turret head held in place by one bolt for fast change over
    • Turret pin assembly (provided for turret head removal & installation) and ball handle assembly can be mounted for right or left handed reloaders!
    • Standard shell holders are held securely in place by a clip spring
    • Primer plugs & sleeves are provided for seating large & small primers
    • Primers are seated away from stacked primers
    • Safety tube included
    • Primer catcher eliminates spent primers on the floor - snaps off for easy emptying
    • Baked Epoxy Finish for quick & easy cleaning
    • Chip & fade resistant

      This Kit Includes;
    • RCBS Turret Press
    • Uniflow Powder Measure
    • Model 5-0-2 Relaoding Scale
    • Speer reloading Manual
    • Case Lube Kit which includes;Case Lube pad, 2-ounce bottle of case lube 2, accessory handle with two interchangeable case neck brushes for .22 to .30 calibers.
    • De-Burring Tool
    • Case Loading Block
    • Fold Up Hex Key Wrench
    • Primer Tray-2
    • Powder Funnel (.22 - .45)

    RCBS Turret Head

    RCBS
    RCB-88902
    Add to cart
    rcbs_turret_head
    • Description
    Makes changing calibers quick & simple

    Leave the dies set up in the turret head & change the head! One bolt does the trick. Six stations for 7/8"-14 thread dies & accessories.
    Dies not included.

    RCBS Hex Lock ring wrench

    RCBS
    RCB-09634
    Add to cart
    • Description
    No more bashed knuckles or fumbling!
    The RCBS Die lock ring wrench simply slips on to the die lock ring for quick & easy adjustment. <br />A pivot-
    ing handle allows leverage from any angle. <br />It is made from heat treated steel & will stand up to all the brute
    force you can muster!

    RCBS Lock-Out die

    RCBS
    RCB-87540
    Add to cart
    • Description
    Fantastic Safety innovation!
    RCBS Lock out die features;
    The lock out die detects a "no powder" or a "double powder" condition in the progressive reloading process. If a wrong cahrge is detected, the die "locks up" halting the travel of the ram, instantly alerting the reloader to the problem so that the cause can be corrected. It will not let reloading commence without the improperly charged case being removed first.

    For use with sraight walled pistol, calibers 9mm & larger & only on progressive presses.

    RCBS Powder checker

    RCBS
    RCB-87590
    Add to cart
    • Description
    For use on progressive presses, the powder checker allows you to visually check powder charges.
    The RCBS Powder Checker sits in between the powder charging & bullet seating stations. Using a probe rod, it lets you visually confirm that the case is properly charged with powder before seating the bullet. In addition to showing a " no charge " condition, it also detects a "low charge" or a "high charge". Black Oxide Finish provides contrast for better visibility.
    Can be used with rifle or pistol cases.
    A simple way to visually check powder charges.

    RCBS dust cover for progressive preses

    RCBS
    RCB-86881
    Add to cart
    dust-cover-presses
    • Description
    Keep your reloading equipment free of dust & debris