MTC Viper Pro 10x44 riflescope

Add to cart
  • Description
  • More

This revolutionary new scope contains the best and most sophisticated turret design available anywhere, the top turret contains a micro gearbox rotating at a 3-1 ratio – this means that three rotations of the top turret translates to a single rotation or the indicator drum making it much easier to know where you are in terms of rotations. Its turret ‘window’ shows a customisable ribbon that shows exactly the information you want from Mills to MOA – even yards or metres can be displayed: It’s your choice.

Perfect for HFT
  • Illuminated reticle
  • 30mm tube
  • Locking turrets
  • side parallax
  • Lens covers included
  • SCB-2 Reticle

The Small Calibre Ballistic (SCB) reticle offers an incredible amount of aim points with a floating cross for clear and accurate target acquisition. This is ideal for use on small targets. The 1 mil dot square around the cross gives a rapid acquisition for small fast moving targets such as rats. When shooting at small targets or when bullet drop becomes critical the versatility of this reticle becomes clear.

Specifications;

  • MTC Viper Pro 10×44
  • Magnification 10x
  • Objective Lens – 44mm
  • FOV @ 1000m – 140m / 23m
  • Diopter Adj – +/-2
  • Eye Relief – 100mm
  • Parallax Setting – 10m -infinity
  • Adj per click – 1/4 MOA
  • Max Windage Adj – 42 MOA
  • Max Elevation Adj – 42 MOA
  • Clicks per one turret revolution – 40
  • MOA per one turret revolution – 10
  • MOA per one Distance Disc revolution – 30
  • Number of steps in one Distance Disc revolution -120
  • Max drop covered in one Distance Disc revolution @ 100m – 87.6cm
  • Max drop covered in one Distance Disc revolution @ 100yds – 31.41 inches
  • Impact point correction in one click @ 100m – 0.73cm
  • Impact point correction in one click @ 100yds – 0.26 inches
  • Tube – 30mm
  • Illuminated reticle with separate on/off and brightness control
  • Length – 365mm
  • Weight – 750g
  • Length of range tape if placed on top of MOA ring – 94.2mm
  • Length of range tape if placed carriage directly – 89.9mm